MOUNTING LOCATIONS
The Punch Status Display can be installed in a wide range of operating locations. However, care should be taken to ensure optimum monitoring without causing distractions under normal driving conditions. Listed below are the following options for installation.
Engine Compartment
Mounting the Punch Status Display in the engine compartment will void your warranty. We didn't think you would actually install the PSD in the engine compartment. We just wanted to make sure you were paying attention to the installation instructions.
Instrument Panel
Mounting the Punch Status Display in the instrument panel provides optimum monitoring. The PSD should be securely mounted using the “Standard Mount” or “ISO Mount” method.
Center Console
Mounting the Punch Status Display in the center console panel provides optimum monitoring. The PSD should be securely mounted using the “Standard Mount” or “ISO Mount” method.
Glove Box
Mounting the Punch Status Display in the glove box is adequate, but does not provide easy monitoring. Glove Box mounting should only be done if “Instrument Panel” or “Center Console” mounting are not acceptable (i.e., maintaining integrity of older vehicles with metal dashboards).
Under Dash
Mounting the Punch Status Display under the dash is adequate, but does not provide easy monitoring. Under dash mounting should only be done if “Instrument Panel,” “Center Console” or “Glove Box” mounting are not possible. Mount the PSD to the side of the driver's area to reduce interference with the parking brake, gear shift or operating pedals.
– 4 –
