Rockford Fosgate RFX9000 Selecting a Station, Preset Buttons, To Set a Preset Button remote use

OPERATION-RADIO TUNER

SELECTING A STATION

Press the DIR	/	Button (SEEK		or )	Remote
					DISP
once and the Tuner will rapidly proceed to the					VOL
					DIR
next DIR	(UP) or pervious DIR			(DOWN)	MODE
station.
Press and holding either the DIR			/	but-	DIR
					MENU
					PUSH
ton (SEEK	or ) for 1 second will put you into

TUNER MANUAL mode. You can now manually search up or down at a rate of one digit

per click (pressing and holding the DIR / button will allow rapid searching).

PRESET BUTTONS

Each Tuner mode—FM1, FM2, and AM—has 10 presets for a total of 30 presets.

NOTE: The following is for the panel of the source unit. See the end steps if using the optional remote.

To Set a Preset Button (for buttons 1 to 6)

1.Tune the Tuner to the station you wish to program.

2.Press and hold any preset button (1 to 6) for five seconds and it will program that setting.

				ROOT	DIR	SONG
	DIR	ENTER	SCAN	RPT	RDM	T/-10	T/+10
PUSH		BAND	1	2	3	4	5

MENU

To Set a Preset Button (for buttons 7 to 0)

3.Tune the Tuner to the station you wish to program.

4.First, press the T-ACC button, then press and hold preset button (7 to 0) for five seconds and it will program that setting.

To Set a Preset Button (remote use)

1.Tune the Tuner to the station you wish to program.

2.Press and hold any preset button (1 to 0) for five seconds and it will program that setting.

8

ROOT MUTE

6 7 T-ACC

RFX 9000

OPEN

PUNCH

0

AS

9

LO/DX

8

MUTE

7 T-ACC

1

16