28
Before You Start Playing
This Roland organ has several built-in demo songs.
For more information of the built-in demo songs, refer to “List of
Preset Song/Demo Song” (p. 78).
1.
From the main screen, press the [Select/Menu] knob.
2.
Turn the [Select/Menu] knob to select “1 Demo.”
3.
Press the [Select/Menu] knob to access the “Demo”
screen.
You can also access the Demo screen from the main screen by
holding in the [SET] piston and pressing the [PLAY/PAUSE]
piston.
4.
Select a demo song.
1. Turn the [Select/Menu] knob to select the demo song “Group.”
2. Turn the [Value/Exit Menu] knob to change the demo song
group.
3. Turn the [Select/Menu] knob to select “Song.”
4. Turn the [Value/Exit Menu] knob to change the song.
5.
Press the [PLAY/PAUSE] piston, and the demo song will
start playing.
When the selected demo song ends, playback will continue with the
next demo song.
6.
Press the [STOP] piston to stop the demo song.
To adjust the satellite speaker volume during the demo song
playback, turn the [Select/Menu] knob to select “Satellite VR”,
and turn the [Value/Exit Menu] knob.
7.
Press the [Value/Exit Menu] knob twice to exit the demo
screen.
* All rights reserved. Unauthorized use of this material for purposes
other than private, personal enjoyment is a violation of applicable
laws.
* No data for the music that is played will be output from MIDI OUT
jack.
* If you play back in the “Song Recorder” screen, you’ll be able to
individually mute the performance of each division (p. 50).

If a screen like the following appears

If internal memory contains performance data that has not been
saved, the following message will appear when you attempt to
listen to a demo song.
• If you want to discard the performance data without saving it, press
the [SET] piston.
• If you don’t want to erase the performance data, press the [Value/
Exit Menu] knob. Save the performance data as described in “Saving
a Recorded Song” (p. 57).
Listening to the Demo Songs
C-380_330_e.book 28ページ ２０１０年４月２８日　水曜日　午後１０時１１分