65
Saving and Loading Settings on USB Memory
8.
Turn the [Select/Menu] knob to select “Copy from,” and
turn the [Value/Exit Menu] knob to change to “USB.”
fig.LCD641.eps
Select the “Copy from” setting as appropriate.
9.
Turn the [Select/Menu] knob to select the “No.” field, and
turn the [Value/Exit Menu] knob to select the number of
the sound settings that you want to copy.
10.
Turn the [Select/Menu] knob to select the “Bank” field,
and turn the [Value/Exit Menu] knob to select the
memory bank that you want to copy.
11.
Turn the [Select/Menu] knob to select the “INT” field, and
turn the [Value/Exit Menu] knob to select the desired
copy-destination bank number.
12.
Press the [SET] piston.
A confirmation screen will appear.
If you decide to cancel, press the [Value/Exit Menu] knob.
fig.LCD642.eps
13.
Press the [SET] piston; the memory bank will be copied.
A “Voice Setup” contains data that specifies the volume balance of
each sound (stop), its brightness, and various adjustments for
parameters.
* Up to 999 sets of voice setups can be saved on one USB memory
device.
1.
Connect your USB memory to the USB memory connector
(p. 26).
2.
From the main screen, press the [Select/Menu] knob.
3.
Turn the [Select/Menu] knob to select “11 Save/Load
(USB).”
fig.LCD012.eps
4.
Press the [Select/Menu] knob to access the “Save/Load
(USB)” screen.
5.
Turn the [Select/Menu] knob to select “Save Voice
Setup.”
fig.LCD644.eps
6.
Press the [Select/Menu] knob to access the “Save Voice
Setup” screen.
7.
Turn the [Select/Menu] knob to select “Save to.”
8.
Turn the [Value/Exit Menu] knob to select “USB.”
fig.LCD091.eps
Setting Explanation
FACTORY Return the specified bank to the factory-set state
INTERNAL Copy the specified internal bank to another bank
USB From the memory banks saved on USB memory, load
only the specified bank into internal memory
Saving and Loading Voice Setup
Saving to USB Memory
C-380_330_e.book 65ページ ２０��０年４月２８日 水曜日 午後１０時１１分