35

Performing

By applying reverberation you can obtain the acoustic characteristics of a performance in a concert hall.
By changing the type of reverberation you can experience the sensation of performing in a variety of locations.

1.

From the main screen, press the [Select/Menu] knob.

2.

Turn the [Select/Menu] knob to select “4 Room Modeling.”

fig.LCD005.eps

3.

Press the [Select/Menu] knob to access the “Room Modeling” screen.

You can also access the “Room Modeling” screen from the main screen by holding in the [SET] piston and turning the
[Reverb] knob.

4.

Turn the [Select/Menu] knob to select “Room Type.”

fig.LCD021.eps

5.

Turn the [Value/Exit Menu] knob to change the Room Type setting.

6.

Press the [Value/Exit Menu] knob twice to return to the main screen.

This setting will return to the default value when you turn off the power, but you can store the setting so that it will be
remembered even after the power is turned off. For details, refer to “Storing Your Settings (Customize)” (p. 73).

Changing the Type of Reverberation

Changing the Room Type

Type Explanation

CHAMBER The reverberation of a pipe chamber
HALL The reverberation of a hall
CHURCH The reverberation of a church
CATHEDRAL The reverberation of a cathedral
C-380_330_e.book 35ページ ２０１０年４月２８日　水曜日　午後１０時１１分