Roland C-380 Display and Panel, External Connectors

18

Names of Things and What They Do

1.

Display

Various information is shown here.

2.

[Select/Menu] Knob/[Satellite Volume] Knob

Turn: Adjusts the volume of the satellite speakers.

When you’re in a menu screen for making detailed

settings, turn this knob to select the item you want to

operate.

Press: Takes you to a menu screen, or finalizes a setting item.

3.

[Value/Exit Menu] Knob

Turn: Adjusts a setting.

Press: Returns you to the previous menu, or cancels an

operation.

4.

[Master Volume] Knob

This adjusts the volume of the entire organ.

5.

[Reverb] Knob

This adjusts the depth of reverberation.

1.

OUTPUT L/MONO, R (Output) Jacks

You can connect an external speaker system here so that the sound

of the organ is played from the connected speakers (p. 74).

2.

INPUT L/MONO, R (Input) Jacks

You can connect an external sound module or similar device here so

that its sounds are heard from the organ’s speakers (p. 75).

3.

MIDI OUT/IN Connectors

You can connect external MIDI devices here to exchange

performance data with the organ (p. 76).

4.

Connector for Service Use

This connector is for technical service use only. Do not connect

anything to this connector.

Display and Panel

32

4 5

1

External Connectors

1 32 4

C-380_330_e.book 18ページ２０１０年４月２８日　水曜日　午後１０時１１分

Contents

Main Page CAUTION ATTENTION INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS USING THE UNIT SAFELY About WARNING and CAUTION Notices About the Symbols ALWAYS OBSERVE THE FOLLOWING Page IMPORTANT NOTES Using USB memories Before Using USB Memory Repairs and Data Additional Precautions Contents Recording Your Performances.................................................................... 56 Practicing Along with a Preset Song or Performance Data...................... 50 Storing a Combination of Stops ................................................................. 46 Saving and Loading Settings on USB Memory.......................................... 62 Connecting External Devices...................................................................... 74 Page Introduction Conventions Used in This Manual Keyboards and Divisions Names of Things and What They Do Names of Things on the C-380 Names of Things on the C-330 Tablets and Pistons (C-380) 1 2 4 7 Names of Things and What They Do 17 19 18 20 22 2421 23 25 Tablets and Pistons (C-330) 4 7 1 2 11 12 13 Names of Things and What They Do 3 5 8 9 6 10 15 17 1914 16 18 20 Display and Panel 32 4 5 1 External Connectors 1 32 4 Before You Start Playing Connecting the Pedalboard Placing the Bench Using the Music rest Installing the Satellite Speakers Attaching to the Main Unit (C-330 Only) Attaching to the Wall Connecting the Satellite Speakers to the Organ Attaching the satellite speakers Opening and Closing the Keyboard Cover (C-380 only) Locking the Cover Connecting the Power Cord Page Turning the Power On and Off Turning On the Power Lower position ON Connecting Headphones Before You Start Playing Note on using USB memory Connecting the USB memory About the Display Adjusting the Display Contrast Contents of the Main Screen Listening to the Demo Songs Performing Press the upper part of the tablet. Press the lower part of one of the PEDAL, MAN I, or MAN II division tablets. Selecting a Sound Variation (Voice Palette) Play the lower keyboard. In the MAN I division, press the lower part of the division coupler [II/I] tablet. Playing the Sounds of Another Division (Couplers) Using a Manual Coupler Using the Melody Coupler Using the Bass Coupler Volume screen Turn the [Reverb] knob to adjust the amount of reverberation. Adjusting the Volume and Reverberation Adjusting the Reverberation Adjusting the Volume of the Satellite Speakers Adjusting the Overall Volume Changing the Type of Reverberation Changing the Room Type Changing the Wall Type Adding Soft Vibrato (Tremulant) Adding Tremulant to Each Division Adjusting the Tremulant Effect C-380_330_e.book 38 Changing the Tuning (Temperament) Using Baroque Pitch Tuning to Match the Pitch of Another Instrument Transposing the Key Using the Expression Pedal to Adjust the Volume of the Organ Specifying the Divisions Affected by the Expression Pedal Storing the Division for which the Volume is to be Adjusted Setting the Minimum Volume of the Expression Pedal Using the Kick Switches Storing a Combination of Stops About the division memory pistons (C-380 only) About the general memory pistons Storing or Recalling a Registration Recalling a Registration Storing a Registration Using Memory Banks Storing the Combination of Memory Pistons as a Memory Bank Recalling a Registration from a Different Memory Bank Recalling Registrations Successively Practicing Along with a Preset Song or Performance Data Selecting and Playing Back a Song Turn the [Select/Menu] knob to select the media type field in the upper right. 3. Page Muting a Specific Division During Playback Playing Back a Specific Division as a Guide Tone Changing the Tempo Using the Metronome Recording Your Performances Recording a Song Play Back the Recorded Song Saving a Recorded Song Page Deleting a Recorded Song Copying a Saved Song Page Saving and Loading Settings on USB Memory Formatting USB Memory Saving to USB Memory Saving and Loading Memory Banks Loading from USB Memory into Internal Memory Deleting a Memory Bank from USB Memory Copying a Memory Bank Saving and Loading Voice Setup Saving to USB Memory Loading a Voice Setup Deleting a Voice Setup Other Settings Settings for the USER/MIDI Couplers Playing Sounds that are not in the Sound Tablets (USER Sound Coupler) Playing Sounds on an External MIDI Sound Module (MIDI Coupler) About MIDI transmit channels When the [USER/MIDI] coupler is on When the [USER/MIDI] coupler is off Settings for transmitted messages Selecting sounds on your external MIDI device How sound names are displayed MIDI Settings Local Control Setting (Local) Press the [Select/Menu] knob. Returning all Settings to the Factory-Set State (Factory Reset) Press the [SET] piston to store the settings. Turn the [Value/Exit Menu] knob to choose the group. Hold down the [SET] piston and press the [0] piston. Storing Your Settings (Customize) Connecting External Devices To turn off the power Connecting to Audio Equipment Playing the Sounds of an External MIDI Sound Module or an Audio Device Adjusting the Volume of your Audio Device Connections with MIDI devices Connecting to MIDI Equipment What is MIDI? Using the Organ to Play the Sounds of a MIDI Sound Module Using V-LINK List of Preset Song/Demo Song List of Voices (Stops) MAN I Division (Lower Keyboard) PEDAL Division (Pedalboard) MAN II Division (Upper Keyboard) USER/MIDI Voice List of Voices (Stops) Orchestra Troubleshooting No sound Problems with the screen display Power does not turn on Something is wrong with the sound Division memory pistons dont work properly (C-380) General memory pistons dont work properly Troubleshooting Cant record Sounds or settings have changed since you turned on the power. Other Performance functions dont work properly Error Messages All shortcut operations must be performed from the main screen. List of Shortcuts Glossary Page MIDI Implementation Chart Model: C-330/C-380 Date: May 01, 2010 Version: 1.10 Specifications Specifications Index A S R P T W V U FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT For C.A. US (Proposition 65) WARNING