45
Performing
Two kick switches are located on the sides of the expression pedal. You can assign a different function to each of these two kick
switches.
fig.foot-switch.eps
1.
From the main screen, press the [Select/Menu] knob.
2.
Turn the [Select/Menu] knob to select “8 Exp. Pedal.”
fig.LCD009.eps
3.
Press the [Select/Menu] knob to access the “Exp. Pedal” screen.
You can also access the “Exp. Pedal” screen from the main screen by holding in the [SET] piston and operating the
expression pedal.
4.
Turn the [Select/Menu] knob to select “Kick SW R” (right kick switch) or “Kick SW L” (left kick switch).
fig.LCD031.eps
5.
Turn the [Value/Exit Menu] knob to adjust the value.
6.
Press the [Value/Exit Menu] knob twice to return to the main screen.
This setting will return to “OFF” when you turn off the power, but you can store the setting so that it will be remembered
even after the power is turned off. For details, refer to “Storing Your Settings (Customize)” (p. 73).
Using the Kick Switches Assignable function Explanation
OFF The kick switch will be off.
NEXT
This has the same function as the [NEXT] piston.
It will switch to the adjacent general memory piston. Each time you press the kick
switch, the general memory piston will switch to the next higher number.
PREV
This has the same function as the C-380’s [PREV] piston.
It will switch to the adjacent general memory piston. Each time you press the kick
switch, the general memory piston will switch to the next lower number.
SUSTAIN
Sustain will be applied while you are pressing the switch.
* Sustain can be applied only to some of the [USER/MIDI] coupler sounds and to the
sounds of an external MIDI sound module.
* Sustain will not be applied to the sounds of the organ.
C-380_330_e.book 45ページ ２０１０年４月２８日 水曜日 午後１０時１１分