Roland C-380 , Storing the Division for which the Volume is to be Adjusted

43
Performing
All of the settings you’ve made using the procedure explained in “Specifying the Divisions Affected by the Expression Pedal” (p. 42)
can be stored to a general memory piston.
1.
From the main screen, press the [Select/Menu] knob.
2. Turn the [Select/Menu] knob to select “8 Exp. Pedal.”
fig.LCD009.eps
3. Press the [Select/Menu] knob to access the “Exp. Pedal” screen.
You can also access the “Exp. Pedal” screen from the main screen by holding in the [SET] piston and operating the
expression pedal.
4.
Turn the [Select/Menu] knob to select “Exp.Mode.”
fig.LCD029.eps
5.
Turn the [Value/Exit Menu] knob to adjust the value.
6. Press the [Value/Exit Menu] knob twice to return to the main screen.
Storing the Division for which the Volume is to be Adjusted
Indication Division
SYSTEM Not stored to a general memory piston.
PISTON Stored to a general memory piston.
About the C-380’s MAN I & PEDAL enclosed piston
The C-380 has a MAN I & PEDAL enclosed piston; when you press this piston to turn it on, you’ll be able to use the
expression pedal to adjust the volume of the MAN I division (lower keyboard) and PEDAL division (pedalboard).
On the C-380, the “Exp. Pedal” screen’s “MAN-I/PEDAL” setting is linked with the MAN I & PEDAL enclosed piston, and its
value is stored in general memory (p. 46).
C-380_330_e.book 43ページ ２０１０年４月２８日 水曜日 午後１０時１１分