68

Other Settings

You can use the [USER/MIDI] couplers to play “USER/MIDI Voice” (p.
80) that are not included in the sound tablets, or to play sounds on
an external MIDI sound module.
Here’s how you can assign a [USER/MIDI] coupler to play a specified
“USER/MIDI Voice” (p. 80) that is not included in the sound tablets,
allowing you to select and play it just like the other stops.
Two [USER/MIDI] couplers are provided for each division.
* For each sound assigned to a [USER/MIDI] coupler, you can adjust
parameters such as Octave, Reverb, and Brilliance, giving you more
flexibility than for the other sound tablets. For details, refer to
“USER/MIDI Voice” (p. 80).

1.

From the main screen, press the [Select/Menu] knob.

2.

Turn the [Select/Menu] knob to select “5 USER/MIDI
Coupler.”

fig.LCD006.eps

3.

Press the [Select/Menu] knob to access the “USER/MIDI”
screen.

4.

Turn the [Select/Menu] knob to move the cursor to the
top position, and then turn the [Value/Exit Menu] knob
to select the tablet that you want to assign a USER Voice.

fig.LCD072.eps

5.

Turn the [Select/Menu] knob to select “Source/MIDI CH,”
and turn the [Value/Exit Menu] knob to select “USER.”

6.

Turn the [Select/Menu] knob to select “Name,” and turn
the [Value/Exit Menu] knob to select a USER Voice.

For details, refer to “USER/MIDI Voice” (p. 80).

7.

Turn the [Select/Menu] knob to select the item that you
want to set, and turn the [Value/Exit Menu] knob to
change the setting.

Settings for the USER/MIDI Couplers

Playing Sounds that are not in the Sound

Tablets (USER Sound Coupler)

If the “USER/MIDI” screen is not displayed
If “Source/MIDI CH” is not set to “USER,” the above screen won’t
appear. In such cases, you’ll need to change the setting using
the following procedure.
1. Turn the [Select/Menu] knob to select “Source/MIDI
CH.”
2. Change the setting to “USER” by turning the [Value/
Exit Menu] knob.

Indication Tablet name

MAN-I A MAN I (lower keyboard) [USER MIDI A] tablet
MAN-I B MAN I (lower keyboard) [USER MIDI B] tablet
MAN-II A MAN II (upper keyboard) [USER MIDI A] tablet
MAN-II B MAN II (upper keyboard) [USER MIDI B] tablet
PEDAL A PEDAL (pedalboard) [USER MIDI A] tablet
PEDAL B PEDAL (pedalboard) [USER MIDI B] tablet

Indication Explanation Range

Volume Specifies the volume of the sound assigned
to the [USER/MIDI] coupler. OFF, 0–127
Octave Specifies the octave of the sound assigned
to the [USER/MIDI] coupler. -2–+2
Reverb
Specifies the reverb depth for the sound
assigned to the [USER/MIDI] coupler.
For organ sounds, set this “OFF.”
OFF, 0–127
Warmth
Adjusts the low-frequency tone for the
sound assigned to the [USER/MIDI]
coupler.
-10–+10
Presence
Adjust the mid-frequency tone for the
sound assigned to the [USER/MIDI]
coupler.
-10–+10
Brilliance
Adjusts the high-frequency tone for the
sound assigned to the [USER/MIDI]
coupler.
-10–+10
Velocity
Velocity value
KBD:
The keyboard’s velocity will be used
EXP:
The expression pedal’s position will be used
2–127:
The specified value will be used as the velocity
C-380_330_e.book 68ページ ２０１０年４月２８日　水曜日　午後１０時１１分