24
Before You Start Playing
Once the connections have been completed (p. 22), turn on
power to your various devices in the order specified. By turning
on devices in the wrong order, you risk causing malfunction
and/or damage to speakers and other devices.
1.
Make sure of the following before the power is turned
on.
• Is the power cord correctly connected to the AC inlet?
• Is the power cord correctly connected to the AC outlet?
2.
Turn the [Master Volume] knob all the way to the left to
minimize the volume.
3.
Press the [POWER] switch to turn on the power.
* Always make sure to have the volume level turned down before
switching on power. Even with the volume all the way down, you
may still hear some sound when the power is switched on, but this is
normal, and does not indicate a malfunction.
For the C-380
For the C-330
The main screen will appear in the display.
This unit is equipped with a protection circuit. A brief interval
(a few seconds) after power up is required before the unit will
operate normally.
4.
Select a stop.
For details, refer to “Playing Various Sounds” (p. 29).
Even though the power has been turned on, playing the
keyboard will not produce sound until you’ve selected a sound
(stop).
5.
Adjust the volume to an appropriate level by moving the
[Master Volume] knob.
Adjust the volume while you play the keyboard to produce sound.
Turning the knob toward the right will increase the volume, and
turning it toward the left will decrease the volume.
Depress the expression pedal to the maximum volume.
Turning the Power On and Off
Turning On the Power
The top side is pressed ON
Lower position ON
Increase the VolumeDecrease the Volume
C-380_330_e.book 24ページ ２０１０年４月２８日 水曜日 午後１０時１１分