6

IMPORTANT NOTES

562

Some connection cables contain resistors. Do not use
cables that incorporate resistors for connecting to this unit.
The use of such cables can cause the sound level to be
extremely low, or impossible to hear. For information on
cable specifications, contact the manufacturer of the cable.

563

Unauthorized duplication, reproduction, hiring, and
lending prohibited.

566b

The sensitivity of the D Beam controller will change
depending on the amount of light in the vicinity of the unit.
If it does not function as you expect, adjust the sensitivity as
appropriate for the brightness of your location.

Using USB Memory

704

When connecting USB memory, firmly insert it all the way
in.

705

Do not touch the pins of the USB memory connector, or
allow them to become dirty.

708

USB memory is made using high-precision electronic
components, so please observe the following points when
handling it.
• To prevent damage from static electrical charges,
discharge any static electricity that might be present in
your body before handling USB memory.
• Do not touch the terminals with your fingers or any metal
object.
• Do not bend or drop USB memory, or subject it to strong
impact.
• Do not leave USB memory in direct sunlight or in
locations such as a closed-up automobile. (Storage
temperature: 0–50 degrees C)
• Do not allow USB memory to become wet.
• Do not disassemble or modify USB memory.

Addition

When connecting USB memory, position it horizontally with
the USB memory connector and insert it without using
excessive force. The USB memory connector may be
damaged if you use excessive force when inserting USB
memory.

Addition

Do not insert anything other than USB memory (e.g., wire,
coins, other types of device) into the USB memory
connector. Doing so will damage the USB memory
connector.

Addition

Do not apply excessive force to the connected USB
memory.

Addition

Attach the USB memory cover when you’re not using USB
memory.

Handling CD-ROMs

801

Avoid touching or scratching the shiny underside (encoded
surface) of the disc. Damaged or dirty CD-ROM discs may
not be read properly. Keep your discs clean using a
commercially available CD cleaner.

Copyright

204

* Microsoft and Windows are registered trademarks of
Microsoft Corporation.

206e

* The screen shots in this document are used in compliance
with the guidelines of the Microsoft Corporation.

213

* Pentium is a registered trademark of Intel Corporation.

220

* All product names mentioned in this document are trade-
marks or registered trademarks of their respective owners.

238

* MPEG Layer-3 audio compression technology is licensed
from Fraunhofer IIS Corporation and THOMSON Multi-
media Corporation.

add

* MatrixQuest™ 2008 TEPCO UQUEST, LTD.
All rights reserved.
The GW-8’s USB functionality uses Matrix-
Quest middleware technology from TEPCO
UQUEST, LTD.
GW-8_e.book 6 ページ 2008年4月1日 火曜日 午前11時44分