Before You Play

Using the Headphones

You can use headphones to enjoy the HP307 without disturbing those around you, such as at night.

Connecting the Headphones

Using the Headphone Hook

 

 

 

The HP307 has two headphone jacks, two people can also use headphones simultaneously.

Whenever you are not using the headphones, you can hang them on the headphone hook of the HP307.

Attaching the Headphone Hook

1.Plug the headphones into the Phones jack.

If headphones are connected, no sound will be output from the HP307’s speakers.

2.Use the HP307’s [Volume] slider to adjust the headphone volume (P.17).

If headphones are connected, a headphone symbol is shown in the lower left of the screen.

Wing nut

Headphone hook

1.Press and twist the headphone hook included with the HP307 into the hole in the bottom left of the HP307 (refer to the figure above).

2.Turn the headphone hook wing nut to secure the headphone hook.

Do not hang anything other than headphones on the headphone hook. Doing so may damage the instrument or the hook.

Cautions when Using Headphones

To prevent damage to the cord’s internal conductors, avoid rough handling. When using headphones, mainly try to handle either the plug or the headset.

Your headphones may be damaged if the volume of a device is already turned up when you plug them in. Minimize the volume before you plug in the headphones.

Excessive input will not only damage your hearing, but may also strain the headphones. Please enjoy music at an appropriate volume.

Use headphones that have a stereo 1/4” phone plug.

18

Page 16
Image 16
Roland HP-307 Using the Headphones, Connecting the Headphones Using the Headphone Hook, Attaching the Headphone Hook