Recording Your Performance

Recording and stopping

fig.Panel

1.Press the [ ] button.

You’ll hear a two-measure count, and then recording will begin.

Alternatively, you can start recording by playing the keyboard instead of pressing the [ ] button. In this case, there will be no count-in.

When recording begins, the [ ] button and [ ] button will light.

During the count, “-2” then “-1” will be shown as the measure number in the lower right of the screen.

2.To stop recording, press the [ ] button.

Additional recording

fig.Panel

1

5

2

4

6 3

1.Press the [ ] button.

You’ll return to the beginning of the recorded performance.

2.Press the [ ] button.

If you want to erase the previously recorded performance and re-record a new

performance, press the [ ] button.

3.If you want to record onto a different track, press the [ ] button.

4.Press the button of the track that you want to record, so it’s blinking.

The [ ] button will light, the [ If you decide not to record, press the [

] button will blink, and the HP307 will enter recording-standby mode. ] button once again.

If you select a previously recorded track for recording, your new performance will be overwritten onto that track, erasing the previously recorded performance.

49

Page 47
Image 47
Roland HP-307 Recording and stopping, Additional recording, To stop recording, press the button