30
Chapter 1 Quick Start

If the Sound or Operation Is not as You

Expect

If, as you modify the settings, the sound or operation is no longer as you
expect and you are unable to restore the correct settings, you can execute the
Factory Reset operation to reset all settings to their factory condition.
fig.1-29
1Press [SYSTEM].
[SYSTEM] will light.
2Hold down [PARAMETER ] to access the following screen.
fig.1-30
3Turn [PATCH/VALUE] to select “ALL.”
fig.1-30a
4Press [WRITE].
The following screen will appear.
fig.1-31
5If you wish to execute factory reset, press [WRITE].
After the data has been initialized, the following screen will appear.
fig.1-09
* If you decide not to execute, press [EXIT].
3 124, 5
When you execute factory
reset, the edited contents
will be lost.
You can make your
selection rapidly by using
the Skip function (p. 32).
FACTORY RESET
SYSTEM [WRITE]
It is also possible to
initialize specific data, such
as only the patches or only
the system settings. For
details, refer to “Restoring
the Factory Settings” (p.
85).
FACTORY RESET

ALL [WRITE]

Are You Sure?

[WRITE/EXIT]

P01 LATIN

01 Conga