87
Messages and Error Messages
Appendices
fig.7-14
A large amount of MIDI messages were received in a short
time, and could not be processed completely.
Confirm that the external MIDI device is properly connected
(p. 78). If the problem persists, reduce the amount of MIDI
messages sent to the HPD-15.
fig.7-15
A MIDI cable was disconnected. (Or communication with the
external MIDI device stopped for some reason.)
Make sure that MIDI cables have not been pulled out or
broken.
fig.7-16
Due to an incorrect Device ID, the system exclusive message
could not be received.
Set the correct Device ID. (p. 82)

Messages

fig.7-17
The HPD-15 is writing data into memory. Do not turn the
power off.
fig.7-18
The HPD-15 is copying data. Do not turn the power off.
fig.7-19
The HPD-15 is executing an exchange function. Do not turn
the power off.
fig.7-23
The HPD-15 is executing a process. Do not turn the power
off.
fig.7-20
The HPD-15 is restoring the factory settings. Do not turn the
power off.
fig.7-21
Bulk data is now being transmitted.
fig.7-22
Bulk data is now being received. Do not turn the power off.
MIDI Buffer Full
MIDI Offline!!
Device ID is
Different!
Now Writing.....
KEEP POWER ON!!
Now Copying.....
KEEP POWER ON!!
Now Exchange....
KEEP POWER ON!!
Now Executing...
KEEP POWER ON!!
Now Resetting...
KEEP POWER ON!!
BULK DATA
Transmitting...
BULK Receiving..
KEEP POWER ON!!