85
Appendices

Restoring the Factory Settings

You can restore patch and pad settings as well as pattern
data stored in the HPD-15 to the settings in effect when the
unit was shipped from the factory.
All data and settings in the restored part are lost. Follow the
procedures described in “Bulk Dump” (p. 80) to save any
data and settings you need to keep to an external MIDI
device.

Procedure for Factory Reset

1. Press [SYSTEM].
fig.7-01
2. Press [PARAMETER ] to display the following
screen.
fig.7-02
You can make your selection rapidly by using the Skip
Function (p. 32).
3. Turn [PATCH/VALUE] to select the part that you wish
to restore.
fig.7-03
4. Press [WRITE] to execute factory reset.
* If you decide not to execute, press [EXIT].
FACTORY RESET:SYSTEM, CHAIN ALL, PATCH
ALL, PTN ALL, ALL
SYSTEM:
Restores all system settings (p. 67) to their factory
presets.
CHAIN ALL:
Erases all patch chain (p. 65) settings.
PATCH ALL:
Restores all user patch (p. 21) settings to their factory
presets.
PTN ALL:
Erases all user pattern (p. 59) data and restores
sequencer settings (p. 60–p. 62) to their factory presets.
ALL:
Restores all settings to their factory presets.
While executing factory reset, do not turn the power off. Data
in the HPD-15’s memory will be corrupted.

UTILITY

LCD Contrast 5

FACTORY RESET
SYSTEM [WRITE]
FACTORY RESET

ALL [WRITE]