31
Chapter 1 Quick Start
Chapter 1

Rapidly Selecting Parameters or Values

Key Repeat Function

This can also be used when selecting either parameters or values, and when
selecting patch groups or patch numbers.
1Press and hold either [ PARAMETER],
[PARAMETER ], [PATCH NUMBER ], [PATCH
NUMBER ], [GROUP -], or [GROUP +].
The parameter, value, patch number, or group will change consecutively.

Turbo Repeat Function

This function can also be used when selecting a value or patch number.
1Hold down [PATCH NUMBER ], and press
[PATCH NUMBER ].
fig.1-32.e
The value (value or patch number) will increase rapidly.
1Hold down [PATCH NUMBER ], and press
[PATCH NUMBER ].
fig.1-33.e
The value (value or patch number) will decrease rapidly.
Turbo Function of the Dial
1Hold down [PATCH SEL], and turn [PATCH/VALUE].
fig.1-33a.e
If you are changing the value, the value will change in 10 steps.
When you select the
instrument or adjust the
pitch, you can use the Skip
function (p. 32) instead of
the Turbo repeat function.
while holding down
press
while holding down press
while
holding
down turn