Quick Guide
The Quick Guide describes required settings and basic operations.
Getting Ready
Making the Connections
For more information about making the connections, refer to “Connect your
1.Make sure all devices are turned off.
2.Connect the external devices.
3.Turn down all volume controls on the
4.Place the EQUALIZER controls at the center position (0).
5.Switch off all [EFX] buttons.
on
6.Switch off the AUX IN/MONITOR IN [MUTE] button.
on
Switch on the Power
*Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
1.Turn on the devices connected to the input jacks.
2.Turn on the
3.Turn on the devices connected to the output jacks.
Turn off the power in the reverse order.
Try Playing Sound from the Built-in Speakers
1.Adjust each channel’s volume knob to its center setting (5).
If you’re using a microphone, turn the CH1 volume knob to
the “MIC” range.
Lower the volume levels for channels you’re not using.
When using a mic
2.While playing sound on the connected devices, slowly turn the [VOLUME] knob to adjust the overall volume level.
3.Use the volume knobs for the respective channels to adjust the volume balance for the connected devices.
4.Use the [VOLUME] knob and the EQUALIZER controls to adjust the overall volume level and sound quality.
Try Applying Built-in Effects
1.Press the [EFX] button for the channel to which you want to apply the effect.
on
2.Use the [EFX] knob to adjust the effect and its depth.
8
