Roland Connect your KC-880, Digital piano, Audio Player Mic Headphones, Foot switches

Connect your KC-880

Refer to the following diagram and connect the KC-880 to the external equipment you are using.

		Digital piano
CD player	Sound module
Rhythm machine	Electronic
Portable	drum	Synthesizer
audio
player

Mic

Headphones

	PCS-31	PCS-31
Red	White Red	White
FS-5L	FS-5L	FS-6
	Foot switches	PA system

*For information on the switch settings, refer to page 12.

* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

Set all of the KC-880’s channel volume knobs (CH 1, CH 2, CH 3 and CH 4) and AUX IN/MONITOR IN [LEVEL] knob as well as the [VOLUME] knob to zero.

*The pin assignment for the XLR type connectors is as shown below. Before making any connections, make sure that this pin assignment is compatible with that of all your other devices.

STEREO

LINK IN

STEREO

LINK OUT

KC-880

Recorder

*When connection cables with resistors are used, the volume level of equipment connected to the inputs (CH 1 through CH 4, AUX IN/ MONITOR IN and STEREO LINK IN) may be low.

If this happens, use connection cables that do not contain resistors.

*Howling could be produced depending on the location of microphones relative to speakers. This can be remedied by:

1.Changing the orientation of the microphone.

2.Relocating microphone at a greater distance from speakers.

3.Lowering volume levels.

9