27
Using PCR Editor
Program Change – Inc Assign the program change increment function (PC
INC).
This will transmit a program change number that is
one greater than the program change number most
recently transmitted in the PCR’s program change
mode.
fig.EditorPCInc.eps_35
There are no parameters to specify for Program
Change – Inc.
RPN [Bn 65 mm Bn 64 ll Bn 06 dm Bn 26 dl] Assign a registered parameter number.
fig.EditorRPN.eps_35
You can specify the following parameters for RPN.
* The range for the data entry LSB [dl] is fixed at 0–127 and
cannot be changed.
NRPN [Bn 63 mm Bn 62 ll Bn 06 dm Bn 26 dl] Assign a non-registered parameter number.
fig.EditorNRPN.eps_35
You can specify the following parameters for NRPN.
* The range for the data entry LSB [dl] is fixed at 0–127 and
cannot be changed.
Channel Message
Item Content
MIDI Channel MIDI channel [n]
RPN MSB RPN parameter number
MSB [mm]
RPN LSB RPN parameter number LSB
[ll]
MSB Min Value Lower limit of data entry
MSB [dm]
MSB Max Value Upper limit of data entry
MSB [dm]
Item Content
MIDI Channel MIDI channel [n]
NRPN MSB NRPN parameter number
MSB [mm]
NRPN LSB NRPN parameter number
LSB [ll]
MSB Min Value Lower limit of data entry
MSB [dm]
MSB Max Value Upper limit of data entry
MSB [dm]
PCR-300_500_800_e.book 27 ページ ２００６年１２月１９日 火曜日 午後２時５９分