4

Names of things and what they do

fig.Panel-Left.eps

Display

This shows a variety of information, such as the current state.

* The display will dim if you leave the PCR without operating it for several seconds.
* The explanations in this manual include illustrations that depict what should typically be
shown by the display. Note, however, that your unit may incorporate a newer, enhanced
version of the system, so what you actually see in the display may not always match what
appears in the manual.

[DYNAMIC MAPPING] button, [V-LINK] button

When you press the [DYNAMIC MAPPING] button, “DYNAMIC MAPPING” or
“V-LINK” will turn on.
The function of the [DYNAMIC MAPPING] button is specified by the System setting
DYNAMIC MAPPING/V-LINK (p. 81).

DYNAMIC MAPPING

Dynamic Mapping is an extended function for future use. For details, refer to the
Roland website.

V-LINK

V-LINK ( ) is a function that allows music and images to be performed
together. By using MIDI to connect two or more V-LINK compatible devices, you
can easily enjoy a wide range of visual effects that are linked to the expressive
elements of a music performance.

Panel

1
2
3
4
5
6
7
8
910 11 12
13 14 15
16

Indication Summary

Alphanumeric characters
When you operate a controller, the value of the parameter
assigned to that controller is briefly displayed. Information
such as MIDI channels and program changes are also dis-
played.
DYNAMIC MAPPING This will light when DYNAMIC MAPPING is active.
USB This will light when the PCR is connected to your computer
via USB.
DATA OUT This will blink when a MIDI message is transmitted from
USB or MIDI OUT.
HEX This will light when the value shown in the display is a hexa-
decimal value.
1
2
PCR-300_500_800_e.book 4 ページ 2006年12月19日 火曜日 午後2時59分