12
Using control maps
The PCR-300/500/800 can transmit control map data to your DAW software in the
form of a bulk dump.
In order to transmit a control map you’ve edited on the PCR keyboard to PCR Editor
or other software you’re using, you’ll need to make settings on the PCR to make it
transmit the bulk data.
For more about PCR Editor, refer to
Using PCR Editor
(p. 14). For details on how
to transmit a control map from PCR Editor, refer to
Transferring data between
PCR Editor and the PCR
(p. 22).
fig.H-Edit.eps
1
Press the [EDIT] button so it’s lit.
fig.D-Edit.eps
The display will indicate “EDIT.”
fig.D-Bulk.eps
2
Turn the VALUE knob to make the display indicate “BULK.”
fig.D-BulkR.eps
3
Press the [ENTER] button.
“BLR” will blink in the display (Bulk Receive).
fig.D-BulkT.eps
4
Turn the VALUE knob to make the display indicate “BLT” (Bulk
Transmit).
Alternatively, you can press controller [A2 (1)] instead of using the
VALUE knob.
5
Press the [ENTER] button.
6
Use the VALUE knob or controllers to choose the type of transmission. Choose the
type of data you want to transmit.
fig.D-TSBulk-Wait.eps
7
Check the indication in the display, then press the [ENTER] button.
The rightmost digit of the display will blink, and the PCR will wait to
transmit bulk data.
8
Put PCR Editor or your DAW software in recording mode, and then press the
PCR’s [ENTER] button. Data transmission will begin.
Choose “EDIROL PCR 2” as the MIDI input port for PCR Editor or your DAW
software. For details on how to make this setting in your DAW software, refer to
the owner’s manual for the software you’re using.
fig.D-End.eps
9
When the PCR has finished transmitting the control map data, the
display will indicate “END.” Press the [ENTER] button to complete
the operation. You’ll also need to stop recording on your DAW
software.
Saving control map data on your computer (Bulk Transmit)
Controller Item Display Explanation
[A1 (0)] BULK RECEIVE Receive bulk data
[A2 (1)] BULK TRANSMIT Transmit bulk data
Controller Item Display Explanation
[A1 (0)] SINGLE BULK The control map data of the current
memory will be transmitted.
[A2 (1)] ALL BULK Data for all fifteen control maps in
internal memory (memories 1–F)
will be transmitted.
PCR-300_500_800_e.book 12 ページ 2006年12月19日 火曜日 午後2時59分