Roland PCR-300, PCR-500, PCR-800 Convenient functions

66
Settings (Edit mode)
A message assigned to a controller can be copied to another controller.
For example, if you want to assign similar functions to more than one controller, you can assign the desired MIDI message to one controller and copy the assignment to other controllers
for greater efficiency.
If you copy an assigned message between controllers of differing types (for example between a button and a knob), the results may be unexpected. For example, if a note message assigned
to a pad is copied to a knob, you won’t get the expected result.
If a rotary encoder simulation assigned to a knob is copied to a button, it will not operate.
Please be aware of the controller type and content of the message when copying MIDI message assignments.
fig.H-Edit.eps
1
Press the [EDIT] button so it’s lit.
fig.D-Edit.eps
The display will indicate “EDIT.”
fig.D-r1.eps
2
Select the copy-destination controller, and move it slightly. If it’s a
button, press it.
The display will indicate the controller number.
3
Check the indication in the display, then press the [ENTER] button.
fig.D-Copy.eps
4
Slightly move the copy-source controller. If it’s a button, press it.
“COPY” will be blinking in the display.
fig.D-s1.eps
5
Press the [ENTER] button.
The copy-source controller number will be blinking in the display.
6 Check the indication in the display, then press the [ENTER] button.
Convenient functions
Copy assignment
PCR-300_500_800_e.book 66 ページ ２００６年１２月１９日 火曜日 午後２時５９分