7
Names of things and what they do
fig.Panel-Side.eps

DC IN jack

You can connect a separately available AC adaptor (p. 92) to this jack. If you
wish to purchase an AC adaptor, please contact your dealer.

Power switch

USB connector

Use this if you’re connecting the PCR to your computer via a USB cable.

MIDI MERGE switch

This switches the MIDI IN message Merge function on/off.
(->
MIDI Merge Destination
(p. 77))

MIDI IN/OUT connectors

You can connect these to the MIDI connectors of other MIDI devices in order to
transmit and receive MIDI messages.
(->
MIDI settings
(p. 76))

Controllers [P1], [P2] (foot pedals)

You can connect suitable pedals to these jacks and use them as controllers.
You can assign the desired MIDI messages to these controllers.
(->
Assigning a MIDI message
(p. 20))
* Use only the specified expression pedal. By connecting any other expression pedals, you
risk causing malfunction and/or damage to the unit.

Security slot ( )

http://www.kensington.com
Side panel
DC
Power turned on when using the AC adaptor
OFF
Power switched off
USB
Power turned on when a USB cable is connected
You can use the USB (i.e., bus power) setting if the PCR-300/500/
800 is connected to your computer via a USB cable. The power will
be supplied from the computer via the USB cable.
If you want to use the PCR on bus power, set the power switch to the
USB position.
* With some computers, the PCR may not operate on bus power. If
so, you’ll need to use the separately available AC adaptor (p. 92).
24 25 26 27 28 29 30
24
25
26
HOLD
You can connect a separately available pedal switch (DP-2, BOSS
FS-5U) here and use it as a hold pedal.
EXPRESSION
You can connect a separately available expression pedal (EV-5,
EV-7) here and use it to control the tone or volume in real time.
27
28
29
30
PCR-300_500_800_e.book 7 ページ 2006年12月19日 火曜日 午後2時59分