Roland PCR-300, PCR-500, PCR-800 Settings (Edit mode)

41
Settings (Edit mode)
The PCR-300/500/800 has a total of fifty controllers: [R1]–[R9], [S1]–[S9], [A1]–[A9], [B1]–[B9], [C1]–[C3], [L1]–[L4], [H1]–[H2], [P1]–[P2], [BEND], [MOD], and [AFTERTOUCH].
You can freely assign the MIDI message that will be transmitted by each of these controllers. You need to use Edit mode to make MIDI message assignments. This section explains how
to assign MIDI messages to the controllers using the PCR keyboard.
Alternatively, you can make these assignments using PCR Editor. For details, refer to Using PCR Editor (p. 14).
The following functions can be assigned to controllers. • If you want to assign a MIDI message to [AFTERTOUCH], press the [EDIT] button
and then press down strongly on the keyboard or press the [AFTERTOUCH]
button.
• If you’ve changed the controller settings, save the control map if you want to keep
your changes. If you turn off the power without saving, your changes will be lost.
(-> Saving a control map (p. 9))
• You can copy an assigned message to another controller, or cancel the
assignment. For details, refer to Copy assignment (p. 66) or Canceling an
assignment (NO ASSIGN) (p. 67).
* If you want to assign a single-byte system message (system realtime message, tune request) or
a freely specified message of up to twenty-four bytes, refer to System exclusive assign (p. 55).
Assigning MIDI messages on the PCR keyboard
Function Display Refer to
Note
Note assign (p. 42)
Aftertouch Aftertouch assign (p. 44)
Control change Control change assign (p. 46)
Program change Program change assign (p. 48)
RPN RPN/NRPN assign (p. 53)
NRPN RPN/NRPN assign (p. 53)
System exclusive
(Sys Ex.)
System exclusive assign (p. 55)
Tempo Tempo assign (p. 52)
No Assign
Canceling an assignment (NO
ASSIGN) (p. 67)
About Basic Editing and Advanced Editing
For assignments other than Tempo and No Assign, the PCR provides basic editing
and advanced editing. You can choose either basic or advanced editing as
appropriate for your needs.
Basic editing:
You can easily assign MIDI messages with the minimum of steps.
Advanced editing:
More steps will be required, but you’ll be able to specify more parameters to
assign more sophisticated MIDI messages.
PCR-300_500_800_e.book 41 ページ ２００６年１２月１９日 火曜日 午後２時５９分