Roland RG-1 , Changing the Volume Balance of the Layered Tones (Layer Balance)

22
Performance
Some tones enable you to perform with two tones layered together. These
are called “Layer tones.”
When you select a Layer tone, you can also change the balance in the volume
of the two Layer tones.
1
Press the [Function] (Exit) button so the indicator is lit.
2
Press the [Song] (Select -) button or [ ] (Select +) button to
display the BALANCE screen.
fig.03-030d
3
Press the [Song] (Select -) button or [ ] (Select +) button to get
the value for “Layer” to flash.
fig.03-040d
4
Press the [ ] (Value -) button or [ ] (Value +) button to
adjust the volume balance.
Example:
When Grand Piano1+Str (Grand Piano 1 + Strings) are selected as the
tones
fig.03-050d
5
Press the [Function] (Exit) button so the indicator goes out.
Changing the Volume Balance of the Layered Tones
(Layer Balance)
Value description
1: 9–9: 1
The volume increases as the value is raised.
The numeral on the left indicates the tone’s original volume lev-
el, and the number on the right indicates the volume of the tone
as played with the other Layer tone.
Volume level of Strings
Volume level of Grand Piano 1
RG-1_e.book 22ページ ２００８年４月８日 火曜日 午後２時３６分