41
Performance
You can perform while the metronome sounds.
You can also change the volume level and the beat of the metronome.
If a song is playing, the metronome will sound at the tempo and time
signature of that song.
1
Press the [Function] (Exit) button so the indicator is lit.
2
Press the [Song] (Select -) button or [ ] (Select +) button to
display the METRONOME screen.
fig.03-420d
3
Press the [Song] (Select -) button or [ ] (Select +) button to get
the value for “METRONOME” to flash.
fig.03-390d
4
Press the [ ] (Value +) button to switch the METRONOME
setting to “On.”
The metronome sound starts.
Setting this to “Off” stops the metronome.
Stopping the Metronome
After starting the metronome sound, you can stop the metronome by
pressing the [Enter] button in any screen other than the Function screen.
1
Press the [Song] (Select -) button or [ ] (Select +) button to get
the value for tempo to flash.
fig.03-390d
Performing with the Metronome
Changing the Tempo
RG-1_e.book 41ページ ２００８年４月８日　火曜日　午後２時３６分