69
Changing Various Settings
This setting specifies what the transpose will affect.
You can use the transpose to change the pitch of both the
song and the keyboard, the pitch of only the song, or the
pitch of only the keyboard.
→
Key Transpose (p. 40), Playback Transpose (p. 55)
→
You can use the Memory Backup function to store these
settings to the RG-1 (p. 71).
1.
Press the [Function] (Exit) button, getting its
indicator to light.
2.
Press the [Song] (Select -) button or [ ] (Select
+) button to display the TRANSPOSE screen.
3.
Press the [Song] (Select -) button or [ ] (Select
+) button so the value set for “Mode” begins
flashing.
fig.06-121d
4.
Press the [ ] (Value -) button or [ ] (Value
+) button to set the transpose mode.
5.
Press the [Function] (Exit) button so the indicator
goes out.
You can assign a variety of functions to the left and center
pedals. You can call up the assigned functions just by
pressing the corresponding pedal.
→
You can use the Memory Backup function to store these
settings to the RG-1 (p. 71).
1.
Press the [Function] (Exit) button, getting its
indicator to light.
2.
Press the [Song] (Select -) button or [ ] (Select
+) button to display the PEDAL screen.
3.
Press the [Song] (Select -) button or [ ] (Select
+) button to get the value for “Cent” (Center
Pedal) or “Left” (Left Pedal) to flash.
fig.06-121d
4.
Press the [ ] (Value -) button or [ ] (Value
+) button to select the function assigned to the
pedal.
Specifying What the Transpose will Affect (Transpose Mode)
Value description
Keyboard
Keyboard notes
Song
Song playback
Keyboard&
Song
Keyboard notes and song playback
Assigning Functions to Pedals
Value Description
Sostenuto
The pedal functions as a sostenuto pedal
(p. 16).
Soft
The pedal functions as a soft pedal (p.
16).
LwrDamper
(Lower Damper)
When using Split performance (p. 38), the
same effect as the damper pedal (p. 16)
will be applied to the left-hand keyboard
area.
Play/Stop
Starts and stops playback of the song.
Pedal EX
If you have a Layer tone (p. 22) selected,
the original tone is played whenever the
pedal is not being pressed as you per-
form.
When you perform while pressing the
pedal, an layer tone is played together
with the original tone.
The volume of the layer tone is adjusted
according to how much you press the
pedal.
Example:
When “Harpsichord + Choir” are selected
• Playing the keyboard without pressing the pedal
Only the harpsichord tone is played.
• Playing the keyboard while pressing the pedal
When the pedal is not pressed, only the harpsichord
tone is played, while the choir tone gradually comes
in as the pedal is pressed. The volume of the choir
tone is adjusted according to how much you press
the pedal.
RG-1_e.book 69ページ ２００８年４月８日　火曜日　午後２時３６分