Roland RG-1 , Changing the Song Playback Method (Play Mode)

70
Changing Various Settings
5.
Press the [Function] (Exit) button so the indicator
goes out.
NOTE
No effects will be applied with “Pedal EX” function
assigned to the pedal if any tone other than the layer
tone is selected.
You can choose the way in which songs are played back on
the RG-1; one song at a time, or all songs successively.
→ You can use the Memory Backup function to store these
settings to the RG-1 (p. 71).
1.
Press the [Function] (Exit) button, getting its
indicator to light.
2. Press the [Song] (Select -) button or [ ] (Select
+) button to select “Mode” in the PLAY screen.
fig.06-120d
3.
Press the [ ] (Value -) button or [ ] (Value
+) button to set the play mode.
4.
Press the [Function] (Exit) button so the indicator
goes out.
Octave
When you play a key while pressing on
the pedal, the note for the key being
pressed and the note one octave above it
are layered and played together.
You can adjust the volume of the sound
one octave above the layer tone by
changing the pressure used on the pedal.
Value Description
Changing the Song Playback
Method (Play Mode)
Value Description
All Song
All of the songs in the genre are played
back in sequence, starting from the select-
ed song.
When the final song in the selected genre is
finished playing, playback then automati-
cally resumes from the first song in that
genre.
One Song
Only the selected song is played.
Playback stops when the song is finished.
RG-1_e.book 70ページ ２００８年４月８日 火曜日 午後２時３６分