36
Performance
Apply a reverb effect to the notes you play with the RG-1.
Reverb makes it sound as if you are playing in a concert hall.
1
Press the [Function] (Exit) button so the indicator is lit.
2
Press the [Song] (Select -) button or [ ] (Select +) button to
select “Reverb” in the EFFECT screen.
fig.03-340d
3
Press the [ ] (Value -) button or [ ] (Value +) button to
change the amount of reverb applied.
4
Press the [Function] (Exit) button so the indicator goes out.
Adding Reverberation to the Sound (Reverb)
Value Description
0–127
Increasing the value results in a deeper reverb effect.
No reverb is applied when the value is set to “0.”
You can save this setting in
the RG-1’s memory using the
Memory Backup function
(p. 71).
RG-1_e.book 36ページ ２００８年４月８日　火曜日　午後２時３６分