Roland TD-6 owner manual Connecting the Pads and the Pedals, Setting Example, Making the Settings

Making the Settings

Connecting the Pads and the Pedals

Using the provided cables, connect the pads, cymbal pads, hi-hat control pedal, and kick trigger unit.

Carefully refer to the numbers shown in the illustration and connect to the appropriate TRIGGER INPUT jacks on the TD-6's rear panel.

Setting Example

fig.P-011.e

TRIGGER INPUT jacks

Before using pads with mesh heads (PD-80, PD- 80R, PD-100, PD-120, KD- 80, or KD-120), be sure to adjust the head tension. Striking the head when the head tension is loose may damage the sensor. For more information on adjusting the head tension, refer to the owner’s manual for each pad.

For fullest performance expression, make exclusive use of Roland’s line of optional pads (PD-5, PD-6, PD-7, PD-9, PD-80, PD- 80R, PD-100, and PD-120), cymbals (CY-6, CY-12H, CY-14C, and CY-15R), and kick trigger units (KD-7, KD-80, and KD-120).

20