Roland TD-6 owner manual Strike the pad you wish to set, Selecting the Pad Type, Press KIT

4

Strike the pad you wish to set.

The setting screen for the struck pad appears.

Selecting the Pad Type

You can also make the selection by pressing

[SHIFT] + [ ] or

[SHIFT] + [ ] (Trigger Select).

Setup Guide

5	Select the most suitable trigger type from the following chart for the
	pad you are using.
	Pad	Trigger Type	Pad	Trigger Type
	PD-5	PD7/9	CY-6	CY6
	PD-6	PD6	CY-12H	CY Type
	PD-7	PD7/9	CY-14C	CY Type
	PD-9	PD7/9	CY-15R	CY Type
	PD-80	PD80/100	KD-5	KD7
	PD-80R	PD80R	KD-7	KD7
	PD-100	PD80/100	KD-80	KD Type
	PD-120	PD120	KD-120	KD Type
6	Press [INC/+] or [DEC/-] to select the trigger type.
7
					These settings apply to
	Repeat Steps 4–6to set the trigger type for each pad.				both the head and the rim.
8	Press [KIT].
	[KIT] lights, and the Drum Kit screen appears.

fig.P-017ai

9

Strike the pads and press the pedals to check the following.

•Are sounds being played with all pads and pedals?

•Is the right instrument for each pad being played?

If the correct sound is not being played, check the pad settings once more and refer to “Troubleshooting” (p. 110).

31