Saving Data to an External Midi, Device Bulk Dump

Chapter 7 Making the MIDI Settings (SETUP/MIDI, BULK DUMP)

fig.07-023ai.e				Saving Data to an External MIDI
				Device (BULK DUMP)
			Value	You can save the TD-6’s drum kits, songs, general settings,
			Value	and more to an external MIDI sequencer.
				and more to an external MIDI sequencer.
Part CH (Part Tx Rx Channel): CH 1–CH16, OFF				use the external sequencer as you would when recording
				musical data, and perform the following steps on the TD-6 as
MIDI Messages Stop Function				shown in the following diagram.
MIDI Messages Stop Function
for Specific Parts in GM
(General MIDI) Mode (GM PART)				Bulk Dump is one kind of System Exclusive message. Be sure
				to use an external MIDI sequencer that is capable of recording
In GM mode, you can make the setting that determines				System Exclusive messages. In addition, confirm that the
whether or not MIDI messages are to be received for each				sequencer is not set to “Do not receive System Exclusive
individual part.				messages.”
When set to “OFF,” that part’s MIDI messages are not
received.
1.	While holding down [SHIFT], press [EDIT			Setting the Device ID (SETUP/MIDI COMMON/DeviceID; p.
	(SETUP)].			101) makes operation more convenient when multiple TD-6’s
	(SETUP)].			are connected.
	[EDIT] lights.			are connected.
	[EDIT] lights.
2.	Press [	] to select “GM PART.”		For more detailed information concerning external MIDI
fig.SETUP-GMPRT_50 (SETUP-MIDI PART)				For more detailed information concerning external MIDI
				devices, be sure to read the owner’s manuals for the devices
				you are using.
				1. Use a MIDI cable to connect the TD-6’s MIDI
				OUT connector to the MIDI IN connector of the
When “GM Mode” is set to “OFF,” “MIDI PART” is displayed,				external sequencer.
and you cannot make the setting.				fig.07-026.e
and you cannot make the setting.
Make the setting after first setting “GM Mode” to “ON”
(SETUP/MIDI COMMON/GM Mode; p. 100).
3.	Press [ENTER		].	MIDI OUT	MIDI IN
3.	Press [ENTER		].
4.	Press [	] or [	] to select the part to be set.
fig.07-024ai.e
				TD-6	External MIDI Sequencer
			Select Part	2. While holding down [SHIFT], press [EDIT
5. Press [INC/+] or [DEC/-] to make the setting.				2. While holding down [SHIFT], press [EDIT
5. Press [INC/+] or [DEC/-] to make the setting.				(SETUP)].
fig.07-025ai.e				(SETUP)].
fig.07-025ai.e
				[EDIT] lights.
				3. Press [ ] to select “BULK DUMP.”

fig.SETUP-BULK_50 (SETUP-BULK DUMP)

Value

6.When you finish making settings, press [KIT] to end the procedure.

4. Press [ENTER ].

Part Rx Sw (Part Rx Switch): OFF, ON

103 TD-6 specifications

The Roland TD-6 is a prominent electronic drum kit that has garnered attention for its innovative features and exceptional sound quality. Launched as part of Roland’s acclaimed V-Drums series, the TD-6 offers a perfect blend of performance, versatility, and affordability, making it a popular choice among both beginners and seasoned drummers.

At the heart of the TD-6 is its advanced sound engine, which delivers an extensive range of drum sounds. This module features an impressive selection of over 1,000 pre-installed drum and percussion sounds, including acoustic drum kits, electronic beats, and world percussion. Additionally, users can customize their kits by layering sounds and adjusting parameters like pitch, decay, and reverb, providing a tailored drumming experience.

One of the standout technologies in the TD-6 is its Advanced Digital Triggering system. This allows for highly responsive performance, capturing the nuances of every stroke. The pads are designed to replicate the feel of acoustic drums, offering a natural playing experience. The kit includes mesh drum heads for the snare and toms, which contribute to a realistic rebound and reduced noise, making it an excellent choice for quiet practice.

The TD-6 also features a user-friendly interface, with an LCD screen that simplifies navigation through the wide array of sounds and settings. With built-in practice features such as metronome, recording capabilities, and play-along tracks, drummers can easily enhance their skills. The onboard effects processor adds further depth to the sound, including compression,EQ, and multi-effects, allowing players to shape their tone dynamically.

Connectivity is another advantage of the TD-6. It offers MIDI output for integration with DAWs and other MIDI-compatible devices, making it suitable for studio recording or live performances. In addition, the module includes audio outputs for direct connection to mixers or amplifiers, ensuring that the sound can easily be amplified.

With its robust build quality, the TD-6 is designed for long-lasting use, making it a reliable companion for practice, studio sessions, or live gigs. Its compact design and lightweight construction further enhance its portability.

In summary, the Roland TD-6 electronic drum kit is a feature-rich instrument that combines exceptional sound quality, advanced triggering technology, and user-friendly operation. Whether you’re a budding drummer or an experienced musician, the TD-6 is a versatile choice that offers endless creative possibilities.

Roland TD-6 Saving Data to an External Midi, Device Bulk Dump, Midi Messages Stop Function, 103

Models: TD-6

Chapter 7 Making the MIDI Settings (SETUP/MIDI, BULK DUMP)

fig.07-023ai.e

Saving Data to an External MIDI

Device (BULK DUMP)

Part CH (Part Tx Rx Channel): CH 1–CH16, OFF

MIDI Messages Stop Function

for Specific Parts in GM

(General MIDI) Mode (GM PART)

(SETUP)].

fig.SETUP-GMPRT_50 (SETUP-MIDI PART)

external sequencer.

fig.07-026.e

Press [ENTER

fig.07-024ai.e

5. Press [INC/+] or [DEC/-] to make the setting.

(SETUP)].

fig.07-025ai.e

fig.SETUP-BULK_50 (SETUP-BULK DUMP)

4. Press [ENTER ].

103

TD-6 specifications