Roland owner manual Making the Settings, Mounting the TD-6 to the Stand

Making the Settings

Mounting the TD-6 to the Stand

1 Attach the stand holder (included with the optional drum stand) to the

TD-6.	• When turning the unit
Using the screws attached to the bottom panel, attach the holder so the unit	upside-down, get a
	bunch of newspapers or
is oriented as shown in the diagram.
	magazines, and place
	them under the four
	corners or at both ends
Use the 8 mm screws (M5 x 8) provided with the TD-6. Use of other screws	to prevent damage to
	the buttons and controls.
may result in damage to the unit.	Also, you should try to
fig.P-009.e	orient the unit so no
	buttons or controls get
	damaged.
	• When turning the unit
	upside-down, handle
	with care to avoid
	dropping it, or allowing
	it to fall or tip over.

Set p G ide

2

Narrow

Wide

Attach the TD-6 and stand holder to the drum stand (such as the

optional MDS-6, MDS-7U, MDS-8, or MDS-10).

For details on assembling the drum stand and attaching the TD-6, refer to the owner’s manual for the drum stand.

To attach the TD-6 to a

cymbal stand or other such

stand, you may want to

use the optional APC-33

All Purpose Clamp to

secure the stand holder. It

can be attached to a pipe of

10.5 mm–30 mm radius.

19