Correct Quick Release Axle Setting
The process of removing wheels is made considerably easier if a Quick Release mechanism is fitted to the wheel axle. Wheels can be removed without using tools. The Quick Release mechanism consists
of a lever controlling a
WARNING: It is crucial that the Quick Release mechanism is properly adjusted when riding. Failure to do so may cause the wheel to wobble or disengage from the bicycle, possibly resulting in harm to the bicycle, and/or the rider.
Consequently:
1.Seek instruction from your bicycle specialist on the correct process for removing and installing Quick Release wheels
2.Prior to riding your bicycle, ensure that the wheel lever is firmly clamped.
To correctly clamp your quick release wheels in place, refer to the following.
1.To set, open the lever so that the curved part faces away from the bicycle.
2.While holding the lever in one hand, spin the adjusting nut manually until it is tight.
3.Spin the lever halfway towards the closed position. Tighten the adjusting nut in a clockwise direction until there is firm resistance to turning the lever beyond that point.
4.Pivot the lever all the way to the closed position so that the curved part of the lever faces the bicycle.
5.When the jagged edges on the Quick Release clamping parts actually begin to cut into the bicycle frame/fork surfaces the wheel is firmly secured.
6.To operate a Quick Release seat post binder mechanism follow the same process.
31
Updated 23/05/07 | RAOM0507 | Apollo Bicycle Company Pty. Ltd. ABN: 60 001 914 469 |
