Bicycle Suspension
To help combat some of the jarring associated with riding on rough terrain some Mountain Bikes are fitted with suspension systems. Primarily suspension systems are built into the forks or the rear of the frame, but can also be included in seat posts as well. By equipping the bicycle with suspension can improve its comfort and handling properties,
and potentially enable the cyclist to rider faster. However, for safety reasons it is imperative you still ride within your own limits. Over time as your riding capabilities improve you may be able to fully appreciate and handle the bike’s features.
Please note, using your bicycle for competitive events, dirt biking, bicycle racing, ramp riding, jumping, stunt riding, downhill racing or similar activities or training for such competitive activities is not recommended.
The range of suspension systems available is vast and will not be detailed comprehensively in this manual. Instead, if your bicycle is equipped with a suspension system and you require further information, refer to the separate leaflet included with your bike (where supplied) or seek assistance from your specialist dealer.
WARNING: Failure to inspect and correctly adjust the suspension system may result in suspension malfunction, potentially causing you to lose control and fall. Keep all exposed moving portions of the suspension system clean and lubricated.
CAUTION: Suspension adjustment should only be made according to the suspension system’s manufacturer instructions and recommendations.
Always
CAUTION: Always refer to the bicycle’s manufacturer before attempting to retrofit suspension as not all bikes can be retrofitted with some types of suspension. Please note changes from the original specifications may void your bicycle warranty.
WARNING: Please note, the front of a bicycle fitted with suspension dips under braking. The rider needs to familiarise themself with the suspension system before attempting riding at great speeds or down hilling.
Failure to do so could cause the rider to lose control and fall.
37
Updated 23/05/07 | RAOM0507 | Apollo Bicycle Company Pty. Ltd. ABN: 60 001 914 469 |
