Installation and Adjustment – Linear Pull Brakes
1.When assembling linear pull brakes, insert the brake body into the centre spring hole in the frame mounting boss, and use the link fixing bolt to fasten the brake body to the frame.
5mm Allen Key
| Washer |
Spring | Link |
hole | fixing |
Stopper | bolt |
pin |
|
2.Hold the shoe against the rim and swap the position of the 6mm and 3mm B washer so that A is maintained at 39mm or more. (Refer to the following diagram for clarification.)
39mm or more
A
3mm washer B | 6mm washer B |
Shoe Fixing Nut
Washer A | Washer B | Washer |
Shoe Fixing Link |
|
|
45
Updated 23/05/07 | RAOM0507 | Apollo Bicycle Company Pty. Ltd. ABN: 60 001 914 469 |
