Apollo Radius manual 5mm Allen Key

3. Fasten the shoe fixing nut while holding the shoe against the rim.

5mm Allen Key

4.Thread the inner cable through the inner cable lead. When a clearance of 1mm between each brake pad and the rim is achieved, secure the cable fixing bolt.

5. Alter the spring tension adjustment screws to correct the balance.

5mm Allen Key

6.Check the brake operation and shoe clearance by fully squeezing the brake lever repeatedly, (about 10 times). Loosen and then re-fasten the cable fixing bolt as per Step 4 until adjustment is correct. Make any fine alterations via the adjusting screw at the brake lever.

46

RAOM0507 Apollo Bicycle Company Pty. Ltd. ABN: 60 001 914 469 Updated 23/05/07