Chapter 2 Making the Pad and Trigger Settings (SETUP/TRIG)

Making the settings

While stepping on the pad being used for the kick, raise the “Mask Time” value until there is no more bouncing (sounds made by the rebounding of the beater).

Mask Time: 0–64ms (4ms steps)

Setting Rim Sensitivity on the PD- 120 and PD-80R (Rim Sens)

When a PD-80R or PD-120 is used for TRIGGER INPUT 2

(SNARE), you can then adjust the Rim Sensitivity.

Setting this to a higher value makes it easier to get rim sounds. When set to “OFF,” playing a rim shot produces the head instrument’s sound. Increasing the value excessively may cause the rim instrument to sound as well when the head is struck.

•This can be adjusted only when the Trigger Input 2 “Trigger Type (Trig Type)” is set to either “PD80R” or “PD120” (SETUP/TRIG BASIC/Trig Type; p. 71).

•When the trigger type is set to something other than “PD80R” or “PD120,” or when a trigger input other than

Trigger Input 2 is selected, a horizontal line ( ) appears, and you cannot make the setting.

•You cannot adjust the rim sensitivity of the PD-7 and PD- 9. Both rim and head use the same values.

Rim Sens (Rim Sensitivity): OFF, 1–15

Using the TD-6 with Acoustic Triggers

First, attach a commercially available acoustic drum trigger to

the acoustic drums. When finished, proceed with the

following settings.

1.Set the trigger type to “AcDrTrig.” (SETUP/TRIG BASIC/Trig Type; p. 71)

2.Set “Threshold” to “0” as a reference value. (SETUP/TRIG BASIC/Threshold; p. 73)

3.Set “TrigCurve (Trigger Curve)” to “LINEAR” as a reference value.

(SETUP/TRIG BASIC/TrigCurve; p. 73)

4.Set the “Sensitivity.”

(SETUP/TRIG BASIC/Sensitivity; p. 73)

5.Set the “Scan Time.”

(SETUP/TRIG ADVNCD/Scan Time; p. 75)

Strike the head several times with the same force, and adjust this parameter if the volume is uneven.

6.Set the “Retrig Cancel (Retrigger Cancel).” (SETUP/TRIG ADVNCD/Retrig Cancel; p. 75)

This prevents multiple notes from sounding when a drum is struck once (mainly for a snare drum or toms).

7.Set the “Mask Time.”

(SETUP/TRIG ADVNCD/Mask Time; p. 75)

On a kick drum, this prevents two sounds instead of the intended “one.”

8.Set the “Xtalk Cancel (Crosstalk Cancel).” (SETUP/TRIG BASIC/Xtalk Cancel; p. 74)

This prevents other instruments with drum triggers from sounding when a drum to which a drum trigger has been attached is struck. If a higher value is set, and if two pads are played simultaneously, the one that is struck less forcefully will not sound. Set this to as low a value as you can.

9.Set the “Threshold.”

(SETUP/TRIG BASIC/Threshold; p. 73)

If notes are unintentionally sounded even after you have adjusted the “CROSSTALK” setting, adjust the “THRESHOLD.” Setting this to a higher value may prevent sounds from being produced when the pad is struck lightly. Set this to as low a value as you can.

10.Set the “TrigCurve (Trigger Curve).” (SETUP/TRIG BASIC/TrigCurve; p. 73)

If changes in playing dynamics do not produce a natural change in the volume of the TD-6 instrument, adjust this parameter.

76

Page 75 Page 77
Page 76
Image 76
Roland owner manual Using the TD-6 with Acoustic Triggers, Setting Rim Sensitivity on the PD- 120 and PD-80R Rim Sens
Page 75 Page 77

TD-6 specifications

The Roland TD-6 is a prominent electronic drum kit that has garnered attention for its innovative features and exceptional sound quality. Launched as part of Roland’s acclaimed V-Drums series, the TD-6 offers a perfect blend of performance, versatility, and affordability, making it a popular choice among both beginners and seasoned drummers.

At the heart of the TD-6 is its advanced sound engine, which delivers an extensive range of drum sounds. This module features an impressive selection of over 1,000 pre-installed drum and percussion sounds, including acoustic drum kits, electronic beats, and world percussion. Additionally, users can customize their kits by layering sounds and adjusting parameters like pitch, decay, and reverb, providing a tailored drumming experience.

One of the standout technologies in the TD-6 is its Advanced Digital Triggering system. This allows for highly responsive performance, capturing the nuances of every stroke. The pads are designed to replicate the feel of acoustic drums, offering a natural playing experience. The kit includes mesh drum heads for the snare and toms, which contribute to a realistic rebound and reduced noise, making it an excellent choice for quiet practice.

The TD-6 also features a user-friendly interface, with an LCD screen that simplifies navigation through the wide array of sounds and settings. With built-in practice features such as metronome, recording capabilities, and play-along tracks, drummers can easily enhance their skills. The onboard effects processor adds further depth to the sound, including compression,EQ, and multi-effects, allowing players to shape their tone dynamically.

Connectivity is another advantage of the TD-6. It offers MIDI output for integration with DAWs and other MIDI-compatible devices, making it suitable for studio recording or live performances. In addition, the module includes audio outputs for direct connection to mixers or amplifiers, ensuring that the sound can easily be amplified.

With its robust build quality, the TD-6 is designed for long-lasting use, making it a reliable companion for practice, studio sessions, or live gigs. Its compact design and lightweight construction further enhance its portability.

In summary, the Roland TD-6 electronic drum kit is a feature-rich instrument that combines exceptional sound quality, advanced triggering technology, and user-friendly operation. Whether you’re a budding drummer or an experienced musician, the TD-6 is a versatile choice that offers endless creative possibilities.
Top Page Image Contents