Manuals / Tunturi / Fitness & Sports / Treadmill

Tunturi J 660 Cleaning and Inspecting the Running Belt, Cleaning the Treadmill, Error Codes

Models: J 660

1 84
Download 84 pages 20.35 Kb
Page 10
Image 10

GB

4.1.CLEANING AND INSPECTING THE RUNNING BELT

Turn the unit off and unplug the electrical cord from the wall outlet and from the treadmill. Carefully turn the treadmill on its side. Wipe off the inside of the running belt using a harsh brush. Do not use solvents. Rotate the running belt carefully by hand to clean the entire inside face. Loosen the belt adjusting screws at the back of the treadmill, if necessary. Return the treadmill into the upright position.

If running belt edges are frayed, check the running belt alignment. If seams are splitting contact your local TUNTURI representative.

4.2. CLEANING THE TREADMILL

Wipe the treadmill surfaces, especially the handlebars and meter from dust with a damp cloth or towel. Do not use solvents.

Use a small vacuum nozzle to carefully vacuum around all visible components (belt, running deck, side rails etc.). By supporting the device on one of the side rails you can also vacuum it from below. Vacuum also from inside the motor hood.

Clean the rollers once a year as follows: Loosen the adjusting bolts and wipe the rollers with a harsh brush. Tighten the tension adjustment bolts. Check that the running belt is aligned and centered on the treadmill bed (see 3.1. ALIGNING THE RUNNING BELT and 3.2. ADJUSTING THE BELT TENSION).

4.3.LUBRICATING THE RUNNING DECK

Lubrication is the most important service activity for the treadmill. This is absolutely essential, if the friction of the running deck increases noticeably or the motor begins to heat up. Lubrication intervals must under no circumstances exceed 200 usage kilometres; we recommend relubrication once a month. During the first 200 km of use, the running deck must be lubricated at intervals of 50 km. Insufficient lubrication will cause the belt, running deck and motor to wear out and break.

NOTE! Before you start to use your treadmill, it must be carefully lubricated per the lubrication instructions below! NOTE! If the treadmill is not used for at least three weeks, it must be carefully lubricated per the lubrication instructions below!

The need for relubrication depends to a great extent on the running styles and weight of the user: heavy user weight and slow speed put particular strain on the device and therefore demand greater lubrication. Use only the teflon enclosed to lubricate the treadmill. Contact your local TUNTURI dealer for further supplies of teflon.

NOTE! The device must under no circumstances be lubricated with silicone!

Please apply teflon by using the pressurised can provided with these instructions. Follow these and the safety

instructions on the teflon bottle carefully.

1.Let the treadmill run at a slow speed and spray teflon into the lubrication pipe underneath the treadmill. The pipe is marked with a decal.

2.When teflon is applied for the first time, the spraying time with the pressurised can should be approximately 20 seconds. Later, a spraying time of 10 seconds is sufficient.

3.Teflon drops through the holes of the lubrication pipe to the center of the running belt; the treadmill is instantly ready for use.

Please ensure after each time that you relubricate your treadmill that a strip of about 8" wide on the underside of the running belt becomes moist with teflon oil along its whole length. If necessary, spray teflon directly to the underside of the running belt.

4.4. ERROR CODES

In case of certain faults relating to the electronics of the treadmill, it has an integral, internal fault-finding system in order that faults can be found and corrected as quickly as possible.

The fault-finding system obviously does not cover all possible faults, but it does help to identify the most likely faults resulting from long-term use. When such a fault occurs, the display shows one of the fault codes below:

CODE

DESCRIPTION

E 1

Failure of speed sensor (sensor does not

 

react to any movement of the belt)

E 4

Lift sensor or elevation system failure

E 7

Software failure

E 8

Speed of the running belt exceeds set

 

speed

If any error code appears on the display or there are other malfunctions, proceed as follows:

1.Turn off the power switch for a minute and then turn it on again.

10

Page 9 Page 11
Page 10
Image 10
Tunturi J 660 Cleaning and Inspecting the Running Belt, Cleaning the Treadmill, Lubricating the Running Deck, Error Codes
Page 9 Page 11

J 660 specifications

The Tunturi J 660 is a multifaceted piece of fitness equipment that stands out for its innovative design and functionality. Targeted primarily at home fitness enthusiasts, this gym machine serves as a multipurpose solution, combining the benefits of a traditional gym workout with convenience and versatility.

One of the main features of the Tunturi J 660 is its robust construction, which is designed to provide stability and durability during intense workouts. Made from high-quality materials, it ensures that users can exercise safely and effectively, whether they are performing strength training or cardio workouts. The machine is built with ergonomics in mind, featuring comfortable grips and an adjustable seat to accommodate users of varying heights and fitness levels.

A key technological advance incorporated in the Tunturi J 660 is its digital monitoring system. This feature allows users to track their progress in real-time, displaying important metrics such as time spent exercising, calories burned, and heart rate. This data helps users to stay motivated and enable them to set achievable fitness goals.

In addition to its monitoring capabilities, the J 660 offers a range of resistance settings. This allows users to customize their workouts according to their fitness levels and objectives. Whether it is building muscle strength or enhancing cardiovascular endurance, the adjustable resistance feature provides the necessary flexibility to cater to individual workout preferences.

The Tunturi J 660 also integrates various exercise modes, meaning users can engage in different workout routines without the need for multiple machines. From rowing and cycling to strength training exercises, this all-in-one machine accommodates a wide variety of workouts, making it an ideal choice for those with limited space.

Moreover, the compact and sleek design of the J 660 allows it to fit seamlessly into any home environment. Its user-friendly interface ensures that individuals of all ages and fitness levels can navigate through the different settings without confusion.

In conclusion, the Tunturi J 660 is an impressive fitness machine that combines robust construction, innovative technology, and versatility. Its main features make it ideal for home workouts, catering to a wide range of fitness goals while providing users with the comfort and data needed to maintain their health and fitness journey.