Roland VS-2480 Owner’s Manual www.rolandus.com 255

19—Phrase Editing Operations

This chapter describes the phrase-based editing operations you can perform in the
VS-2480. Most of the operations can be performed using a mouse, the TRACK EDIT
buttons or the edit commands presented in the TRACK menu. Some can be performed
only from the TRACK menu. We’ll list the way(s) each operation can be performed.
Chapter 18, “Editing Tracks,” explains:
• important editing concepts you need to know—see Page 235.
• all about the FROM and TO edit points—see Page 236.
• how to edit using a mouse—see Page 241.
• how to edit using the TRACK EDIT buttons—see Page 247.
• how to edit from the TRACK menu—see Page 249.

COPY

Use: Mouse, TRACK EDIT buttons, TRACK menu

Phrase COPY makes a copy of each selected phrase and pastes the copy
at the desired location. You can copy a phrase to a new time location
and/or to another track. You can copy it to a currently selected V-Track,
or to a V-Track that isn’t currently selected.

Why You’d Use Phrase COPY

You can use COPY to build a track from a short musical segment such as a drum
pattern. By pasting the pattern end-to-end the desired number of times, you can create
a seamless drum loop. COPY also allows you re-use performances that occur multiple
times in a project—perfectly performed chorus background vocals, for example. You
can also create a safety copy of a phrase on a spare V-Track before editing the original.

Edit Points

•

FROM

—sets the location of the phrase’s time anchor.
•

TO

—sets the time location at which you want to paste the time anchor.
You can find step-by-step editing instructions in the Step-by-Step Instruction Finder
that starts on Page 20.
When copying or moving phrases, or creating a new phrase, don’t mix project
recording modes. If your project uses a recording mode other than CDR, and you’ve
recorded mastering tracks (Page 340) in CDR mode, their phrases can’t be used on
other project V-Tracks. Likewise, non-CDR phrases can’t be used on CDR-recorded
V-Tracks. If you attempt either action, the VS-2480 displays “Found Illegal Track Pair!”
Press ENTER/YES. You can easily spot CDR-recorded tracks—see Page 341.
The TRACK menu’s phrase COPY operation lets you copy phrases to V-Tracks that
aren’t currently selected.
You can loop rhythm patterns even more easily using the VS-2480’s phrase sequencer,
described in Chapter 21.
TRACK menu
F1 (COPY)
VS2480OMUS.book 255 ページ ２００６年２月７日　火曜日　午後４時１６分