26—Automix

338 www.rolandus.com Roland VS-2480 Owner’s Manual

On the AUTOMIX MICRO EDIT screen, you can individually edit the location and
value of any Automix event. You can also delete any events you no longer want, and
create new ones if you so choose.
To leave the AUTOMIX MICRO EDIT screen, press F6 (EXIT).

Micro-Editing Automix Data

1. To view the desired Automix track’s data, press F1 (Tr Inc) or F2 (Tr Dec) to move
higher or lower, respectively, through the currently targeted Automix tracks. The
current track’s name and data is shown above the list of its Automix events.
2. Press

or

to select the desired event in the list, and:
•

To change an Automix event’s location

—Use

and

to select the desired unit of
time measurement. You can select time code or measures/beats/ticks. Turn the
TIME VALUE dial to select the desired start location.
•

To change an Automix event’s value

—Use

and

to highlight the event’s value
and turn the TIME VALUE dial to select the desired value.

Deleting an Automix Event

1. Press

or

to select the event in the list.
2. Press F4 (DELETE) to erase the selected Automix event.

Creating a New Automix Event

1. Press

or

to select an Automix event of the type you want to create.
2. Press F3 (CREATE) to place a copy of the currently selected Automix event at the
selected event’s location.
3. Edit the new Automix event’s location and value as desired.

Undoing an Automix Micro-Edit

1. Press F5 (UNDO). Until you record more Automix data or perform a new Automix
edit, you can press F5 (REDO) to reverse the undo.
You can see the changes you make in the data window above the phrase list.
If you can find an event at the desired location that’s the same type of Automix event as
the one you want to create, select it to save time.
If you create a new event on an Automix track with no other events, the VS-2480 creates
a Level event.
VS2480OMUS.book 338 ページ ２００６年２月７日　火曜日　午後４時１６分