26—Automix

Roland VS-2480 Owner’s Manual www.rolandus.com 335

INSERT

Insert adds an area of blank space at the IN location equal to the length of the selected
Automix region—all data at the IN point and onward is moved so that it starts at the
end of the inserted blank space. When you’ve inserted empty space in an audio track,
you’ll want to insert space in the accompanying Automix track as well so that your
Automix events line up properly with their corresponding audio data.

CUT

CUT deletes the Automix events between the IN and OUT points and moves the
remaining data forward so that it starts at the IN point. You might cut Automix data
when it occurs just a bit later than you want it to, or when you need to re-align it with
audio you’ve moved forward in the project.

ERASE

Automix ERASE cleans out Automix events between the IN and OUT points. This can
be useful when you’ve recorded parameter value changes you decide you don’t want,
preferring to let an earlier parameter value remain in place until the OUT point.

Edit point: What it does:

FROM sets the location of the Automix data region’s time anchor
TO sets the destination location for the time anchor
When you move Automix data to a new location, it replaces any Automix data already
present in the destination location.
Before After
OUT TOIN OUT TOIN
FROM is set to
the same
location as IN.
Before After
OUTIN OUTIN
Before After
OUTIN OUTIN
Before After
OUTIN OUTIN
VS2480OMUS.book 335 ページ ２００６年２月７日　火曜日　午後４時１６分