Roland VS-2480 , NAME, PROTECT,

7—Project and Drive Operations
Roland VS-2480 Owner’s Manual www.rolandus.com 99
8. Press F5 (OK). The VS-2480 displays:
9. To proceed, press ENTER/YES, or press EXIT/NO to cancel the operation.
The VS-2480 asks if you want to store the current project before creating and
loading the new one.
10. Press ENTER/YES to save any changes you’ve made to the currently loaded project,
or press EXIT/NO to create and load the new project without saving the old one.
NAME
You can re-name the currently loaded project. On the PROJECT NAME screen, you can
also enter a comment about the project and view assorted project information.
Re-Naming a Project
1. Press PROJECT.
2. If “NAME” isn’t visible above F3, press PAGE until it is.
3. Press F3 (NAME)—the PROJECT NAME screen appears.
4. Enter the desired name as described in “Naming” on Page 73.
Entering a Project Comment
1. On the PROJECT NAME screen, select the Comment box and enter the desired
comment the same way you’d enter a name.
PROTECT
You can lock a project on your hard drive to protect its data from being
accidentally overwritten, and to prevent accidental erasure of the
project. This is called “write-protecting” a project. You can also unlock a
project using the same procedure.
PROJECT menu
F3 (NAME)
PROJECT menu
F4 (PROTEC)
VS2480OMUS.book 99 ページ ２００６年２月７日 火曜日 午後４時１６分