Connecting Recording Equipment
Connections to the Analog Jacks
Connecting a Mic
The
The eight audio inputs
(INPUT
“Tools” menu, open | [+48] button to |
make settings. When the system is powered up, the phantom power will be turned off. | |
When you load
a project in SONAR, the state that is saved in the project will be reflected.
When using
a 
condenser mic that requires a balanced (XLR) connection that
supplies phantom power, set 
[+48] button ON (PHANTOM ON).
When using a dynamic mic etc. that has a phone plug, set 
[+48] button OFF (PHANTOM OFF).
You must leave the phantom power turned off unless you’ve connected a condenser mic that requires a phantom power supply. Supplying phantom power to a dynamic mic or audio playback device will cause malfunctions. For details on the specifications of your mic, refer to the owner’s manual for your mic.
Mics with balanced (XLR) plugs
Mics with phone plugs
VS-700C Front Panel
For a mic,
select the “NORMAL” setting.
Use this to adjust the recording |
|
level. | Mics with phone plugs |
Connecting Synthesizers or Audio Equipment
If you want to connect equipment such as a synthesizer or effects processor, use audio cables to connect the output connectors of such devices to the 
INPUT jacks (1, 2).
Connecting a Guitar or Bass
If you want to connect a guitar or bass directly, connect it to the AUX IN jack located on the front panel of the
For a guitar or bass, select the
Use this to adjust the recording level.
When connection cables with resistors are used, the volume level of equipment connected to the inputs (INPUT
16
