Roland owner manual Using the VS-700R I/O in Standalone Mode, Changes to the Settings

Using the VS-700R I/O in Standalone Mode

To use the VS-700R I/O without connecting it to the VS-700C console, it needs to be set to “Standalone mode.”

While in Standalone mode, AUX IN cannot be used.

Changes to the Settings

In order to use the VS-700R I/O in “Standalone mode,” you need to open the top cover (ARX slot), then set the SETTING dip switches to the positions shown below. Next, switch the unit's power off, then turn it back on again.

Normal setting Settings for Standalone mode

11