Roland VS-700R Connections to the Digital Connectors, Connecting a Digital Audio Source

Connecting Recording Equipment

Connections to the Digital Connectors

Connecting a Digital Audio Source

If you want to digitally connect a DAT or similar device, connect its output connector (e.g., DIGITAL OUT connector) to the VS-700R's DIGITAL IN connector.

VS-700R Rear Panel

	Using an
If you're connecting an ADAT device,	AES/EBU
	connector
connect it to the ADAT connector.
A maximum of eight channels can be input

Using

acoaxial

connector

The DIGITAL 1 coaxial connector and AES/EBU connector are a mutually exclusive selection. To make your choice, go to SONAR’s “Tools” menu, open “ VS-700,” select the “MIC PRE” tab, and make the desired setting in the “DIGITAL 1 INPUT” field.

Howling could be produced depending on the location of microphones relative to speakers. This can be remedied by:

1.Changing the orientation of the microphone(s).

2.Relocating microphone(s) at a greater distance from speakers.

3.Lowering volume levels.

17