24
Installing the ARX Expansion Board
To remove an expansion board, reverse the process by which you inserted it.
1.
Unlatch the latched board holders.
fig.attach08.eps
2.
Verify that the two latched board holders are unlocked, then gently pull up the board and
disconnect the connector.
fig.attach09.eps
3.
Disengage the board from the non-latched board holders, and remove the board.
4.
Attach the cover by reversing step 2 of the installation process.
Removing an Expansion Board
VS-700R_e1.book 24 ページ 2010年6月15日 火曜日 午後4時59分