Attaching the Rackmount Brackets
If you want to install the
1.Disconnect all connection cables from the
2.As shown in the illustration below, remove three screws each from the left and right sides of the
3.Attach the rackmount brackets using the screws you removed in step 2.
4.Install the unit in the rack as appropriate for your situation.
*Fasten the screws securely.
*Be careful not to lose the included screws.
*For safety’s sake, do not use any screws other than the included ones.
*If you install the system in a 19" rack, you must leave at least 1 cm of space outside the intake vent and exhaust vent.
*Be careful when installing the unit in the rack so you do not get your fingers pinched.
For the installation, refer also to “Placement” (p. 6).
29
