Setting the electronic clock When you first plug in the range, or if your
electricity was off for a while, all indicators will
come on and the display will show “88:88”. The
display will then change to “--:--“. SET and the
Clock Indicator will show in the display.
1. Push the Clock button. ‘12:OO” will show in
the display.
Using the electronic Timer The Timer does not start or stop the oven. it
works like a kiichen timer. Set it in minutes up to
24 hours.
1.
2.
Push the Timer button. SET, TIMER, HR and
MN will come on and the display will show “:OO”.
Turn the Set Knob until the desired time
shows in the display. The timer will begin
counting down two seconds after the time is
set. You will hear two tones when one minute
is remaining on the timer. When the time is up,
you will hear three tones. After the three
tones, the display will return to the time of day
and TIMER will flash. You will hear two tones
every 10 seconds until you cancel the Timer.
3. To cancel Timer after countdown is over,
push the Clock button and the display will return
to the time of day. TIMER will stop showing.
To cancel Timer before
countdown is over:
Push the Timer button. The display will show
SET, TIMER. HR. MN and “:OO” for a few
seconds. The time of day will then be displayed.